Unlock Bootloader of your LG G4 Stylus using ADB Fastboot

Most Popular Key Features

LG is the most popular brand in the world, the company announced their latest G4 Stylus smartphone.
LG G4 Stylus smartphone comes with 8GB internal memory with 1GB RAM.
The device is coming with high Android 5.0 (Lollipop), upgradable to 5.1 (Lollipop) operating system, that runs on GSM / HSPA / LTE technology. It was announced on 05 April 2015 and release date of the device is 12 May 2015.
The device is powered by Android 5.0 (Lollipop), upgradable to 5.1 (Lollipop) operating system, that runs on GSM / HSPA / LTE technology. It was announced on 05 April 2015 and release date of the device is 12 May 2015.
The Dimensions of the smartphone is 154.3 x 79.2 x 9.6 mm (6.07 x 3.12 x 0.38 in) and weight is 163 g (5.75 oz). The latest device is Dual SIM supported.
G4 Stylus display screen size is 5.7 inches, 89.6 cm2 (~73.3% screen-to-body ratio) and resolution of the device is 720 x 1280 pixels, 16:9 ratio (~258 ppi density).

The latest smartphone is powered by Qualcomm MSM8916 Snapdragon 410 – H631, H635, H630D, MS631 and device has powerful CPU such as Quad-core 1.2 GHz Cortex-A53 – H631, H635, H630D, MS631, with Adreno 306 – H631, H635, H630D, MS631 GPU is also awesome.
The Rear Camera of the smartphone is 8 Megapixels, autofocus, LED flash , while Selfie Camera is 5 Megapixels. Everyone want to need maximum selfie camera for pictures. Read More

Unlock Bootloader on G4 Stylus Using ADB Fastboot

No doubt that today we will help you that how to unlock the bootloader on LG G4 Stylus. Unlocking bootloader is a void that will effect on your device warranty. So we will not force you, do it on your own risk. Today we will guide you if would you like to install TWRP Recovery and if you want to root your smartphone. You must unlock the bootloader on your LG G4 Stylus. The following steps will help you to unlock the bootloader.
A bootloader is a software piece, it will automatically run on your LG G4 Stylus. Moreover, it is most important to have a functionality bootloader that starts up your device. That why bootloaders are stored in a stable memory away from your device reach. But don’t worry we are here to provide you some methods and solution for your LG G4 Stylus. We hope that these methods can help you to unlock bootloader your device. However, we highly recommend you to follow the steps very carefully step by step to avoid any permanent damage caused to your device.
You can void your warranty.
There will be issues with official OTA updates.
Moreover, you can brick your device or stuck in a boot loop if you do not follow the steps to unlock the bootloader carefully.
But, there are certain advantages once, you have unlocked the bootloader of your device;
You can install any custom ROM such as Lineage OS, Resurrection Remix ROM, and much more… You can root your LG G4 Stylus smartphone. You can flash TWRP.

Requirements

You need a Windows Laptop/PC
Make sure that your device is charged more then 60% or your smartphone must be charge up to 60 percent.
Before we begin the unlocking of bootloader, we would strongly recommend you to create a backup of your device.
This is the method only for G4 Stylus and you can for any other smartphone.
Steps to Unlock Bootloader of G4 Stylus
As you know that we already mentioned above, you need to have an unlocked bootloader and you may install custom ROMs, restricted apps, on your device.
You should follow the below steps to unlock the bootloader of your device;

01: Enable Developer Options:
Go to Settings>> About device. Tap 7 times on Build number to enable Developer options.
02: Now, go back to the Developer Options.
03: Enable OEM Unlock.
To enable it, go to Settings>>Developer options>> Enable OEM Unlock
04: Turn OFF your device completely.
05: Download and set-up the ADB and Fastboot tools on our PC.
06: Now, you need to connect your smartphone to the PC via a USB cable.
07: Wait until all the USB Drivers get installed on your PC.
08: Now, head to the same folder where you have extracted the contents of the ADB and Fastboot tools, and open the CMD or command prompt.
09: Now, in the command prompt, enter the below command and press the Enter button on your keyboard;
adb devices
10: The above command will show whether your device is detected by the PC and all the Fastboot drivers are installed correctly or not;
The output would be like: List of devices attached device (If your device’s serial number is listed in the list of connected devices then, you are good to go ahead. But, if your device’s serial number is not listed on the list then, you need to install all the drivers again)
11: Type the below command to enter the bootloader mode, and press Enter;
adb reboot bootloader
12: Now, enter the below command to unlock the bootloader of the G4 Stylus device. Keep in mind that this step will wipe off the data on your smartphone;
fastboot flashing unlock
13: Your device will now ask you to confirm. You can confirm using the Volume buttons
14: Your device will now reboot.
15: That’s it! You have successfully unlocked the bootloader of the G4 Stylus smartphone.
You can now go ahead and root your device and install various MODs, custom ROMs or modify the firmware of your device.

We hope that you have read all of the above steps carefully and now you can now go ahead and root your device and install various MODs, custom ROMs or modify the firmware of your device.
NOTE: Before we begin with the unlocking of bootloader, I would strongly recommend you to create a backup of your device. If anything goes wrong the author or Gizte.com are not responsible for it.

Summary
Review Date
Reviewed Item
Unlock Bootloader of your LG G4 Stylus using ADB Fastboot
Author Rating
51star1star1star1star1star

Leave a Reply

Your email address will not be published. Required fields are marked *